PRODUCTS CENTER
DO Thermal Insulation Performance Tester
Category:
Product Description
Xiangke RBC-II-30KN Thermal Insulation Performance Tester (Material Cold Surface Temperature Tester) (120*120mm, 1000℃) Introduction:
This equipment is suitable for testing the thermal insulation performance of thermal insulation materials. The instrument measures the temperature difference between the two sides of the sample in the temperature range of room temperature to 1000℃, with a steady-state heat source on the hot side. The temperature is controlled from room temperature to 1000℃, and temperature and time data are automatically collected. The cold side achieves precise testing of the sample back temperature and automatically collects temperature and time data. The equipment can achieve electric loading of 0～30KN pressure, ensuring close contact between the sample and the temperature measuring end. It is also equipped with a high-precision displacement sensor to measure the thickness change of the sample under different pressures.
Thermal Insulation Performance Tester Main Technical Parameters:
1. Sample stage size: 120*120mm, sample thickness range: 0.5mm~60mm. (Note: Other sizes can be customized according to customer requirements)
2. Maximum temperature of the hot side: 1000℃, heating holding time: more than 20 minutes. Temperature control accuracy: ±1℃.
3. 1 temperature measuring point on the hot side. The hot side material can withstand 1000℃ for a long time.
4. 2 temperature measuring points on the cold side. The cold side contact end uses heat-resistant stainless steel. Note: Additional temperature measuring points can be added by adding external temperature measuring wires for multi-layer testing.
5. The instrument is equipped with an automatic loading device and is connected to a computer for automatic control. The pressure is adjustable, with specifications such as 0～10KN, 0～20KN, and 0～30KN available. Pressure control accuracy: ±1%.
6. Equipped with a high-precision displacement sensor to measure the thickness change of the sample under different pressures, with a resolution of 1µm.
7. Pressure, temperature, and sample thickness are displayed on the digital instrument and can be controlled by a computer for data processing and report generation. Data can be transferred out using a U disk and printed. The temperature instrument sampling frequency can be selected as 0.1s, 0.5s, and 1s; the number of temperature instrument sampling channels ≥8.
8. High-temperature protection device: High-temperature anti-scalding protection measures - protective cover added to the sample test.
9. The sample can be placed after the heating stage is heated to the required temperature, manual sample loading.
10. Main accessory specifications: Pressure sensor (can be selected according to customer requirements), thermocouple: K type, intelligent temperature control instrument: Xiamen Yudian AI series, high-precision displacement sensor: WYD series.
11. The instrument performs automatic computer testing and data processing, and saves curves and test data.
12. Voltage: 220V, 50HZ, Power: 2KW.
Configuration List:
Serial Number | Name | Brand and Model | Quantity | Remarks |
1 | Hot Plate Temperature Difference Testing Device Host | Xiangke RBC-II-30KN | 1 set |
120*120mm, 1000℃ |
2 | Testing Software |
Xiangke RBC-II-30KN | 1 copy | |
3 | Data Cable |
Xiangke RBC-II-30KN | 1 set | |
4 | Silicon Carbide Rod | 1 set | Installed on the host | |
5 | Temperature Measuring Thermocouple | K type | 3 | Installed on the host |
6 | Computer | 1 set | As per contract configuration |
MESSAGE