Turkmenistan Thermal Conductivity Tester (Heat Flow Method)
Product Description
Xiangtan Xiangke DRL-III Series Thermal Conductivity Tester (Heat Flow Method)
I. Overview
The thermal conductivity meter mainly tests the thermal resistance of thin thermal conductors, solid electrical insulating materials, thermally conductive resins, silicone rubber and grease, rubber, plastics, beryllium oxide ceramics, alumina ceramics and other small materials, as well as the contact thermal resistance at the solid interface and the thermal conductivity of the materials. The test material is in the form of solid flakes. With a frame, powder and paste materials can also be tested.
Instrument reference standards: MIL-I-49456A (insulating sheets, thermally conductive resins, thermally conductive glass fiber reinforced); GB 5598-85 (Determination method of thermal conductivity of beryllium oxide ceramics); ASTM-D5470-12 (Test standard for heat transfer performance of thin thermally conductive solid electrical insulating materials), etc.
Instrument features: Automatic pressurization, automatic thickness measurement, and fully automatic experimental control. 6-point temperature gradient detection improves testing accuracy. It can detect the thermal resistance curve under different pressures, uses an optimized mathematical model to measure the thermal conductivity and thermal resistance of materials, and the contact thermal resistance at the interface.
Widely used in colleges and universities, scientific research units, quality inspection departments, and material analysis and testing in manufacturing plants.
II. DRL-III Series Thermal Conductivity Tester (Heat Flow Method) Main Parameters
Main Parameters | DRL-3 (Standard Type) | DRL-3 (Enhanced Type) | DRL-3P（Vacuum type） |
1. Sample Size | ≤Φ30mm | ≤Φ30mm | ≤Φ30mm |
2. Sample Thickness | 0.02-20mm | 0.02-20mm | 0.02-20mm |
3. Hot Spot Temperature | RT - 99.99℃ | RT - 200℃ | RT - 100℃ |
4. Cold Spot Temperature | 0-99.0℃ | 0-99.0℃ | 0-99.0℃ |
5. Thermal Conductivity | 0.1～45 W/m*k | 0.05～45 W/m*k | 0.05～45 W/m*k |
6. Thermal Resistance (m2*K/W) | 0.000005～0.05 | 0.000005～0.05 | 0.000005～0.05 |
7. Testing Accuracy | ≤3％ | ≤3％ | ≤3％ |
7. Pressure Measurement | 0～1000N | 0～1000N | 0～1000N |
8. Displacement Measurement | 0～40mm | 0～40mm | 0～40mm |
9. Pressure Control | Electric | Electric | Electric |
10. Experimental Methods | a. Thermal resistance test of samples under different pressures. b. Thermal conductivity test of materials. c. Contact thermal resistance test. d. Thermal resistance test of aluminum substrate (composite materials). e. Aging reliability test. | ||
11.Power Supply | Voltage: 220V,50HZ, power less than 1KW. | ||
MESSAGE